<button id="y0k2s"></button>
  • <del id="y0k2s"></del>
  • <cite id="y0k2s"></cite>
    <bdo id="y0k2s"><strong id="y0k2s"></strong></bdo>
    
<cite id="y0k2s"><center id="y0k2s"></center></cite>
    <center id="y0k2s"><acronym id="y0k2s"></acronym></center>
    

    • <button id="y0k2s"><source id="y0k2s"></source></button>
    
    
    
    

        
    
        
    
            
    
                                
    
                    
    RTD15CN 日本東日扭力起子|東日RTD15CN扭力起子|東日扭力起子山東總代理
    
                    
    
                         RTD15CN 日本東日扭力起子|東日RTD15CN扭力起子|東日扭力起子山東總代理RTD15CN 日本東日扭力起子|東日RTD15CN扭力起子|東日扭力起子山東總代理RTD15CN 日本東日扭力起子|東日RTD15CN扭力起子|東日扭力起子山東總代理RTD15CN 日本東日扭力起子|東日RTD15CN扭力起子|東日扭力起子山東總代理RTD15CN 日本東日扭力起子|東日RTD15CN扭力起子|東日扭力起子山東總代理
    產品介紹：
    型號測量范圍全長重量參考(公制)
    最小~最大刻度舊型號扭力調整范圍
    cN.mcN.mmmkg最小~最大
    　　　　　　kgf.cm
    RTD15CN2~150.1100501.5RTD0.2~1.5
    RTD30CN4~300.2100503RTD0.4~3
    RTD60CN10~600.5105806RTD1~6
    RTD120CN20~120112012512RTD2~12
    RTD260CN60~260214022526RTD6~26
    RTD500CN100~5002.515033050RTD10~50
    產品備注：
    注1:RTD500CN用輔助緊固工具另購
    注2:只有RTD15CN-260CN有鎖止機構
    注3:批頭須另購
    附件:只有260CN,500CN型有扳手附件
    濟南沐子商貿公司長期致力于工業測量、電工電子儀器儀表、五金工具等專業配套產品銷售及售后服務。 客戶包括汽車零部件制造、航空航天、科研實驗、電子電工、五金機械加工等商業領域，我司一直秉承為客戶提供專業精準的計量儀器為企業任務，同時配備良好的技術支持和售后服務。公司設立于山東省濟南市 ,以服務山東及全國客戶伙伴為宗旨,沐子人以用心做實事，服務至上為原則，服務于我們的客戶。公司產品齊全庫存充足；供貨周期短、絕對價格優勢。竭誠歡迎全國新老客戶的垂詢、指導！共同前進 互利共贏！
    
                    
    
                                        
    
                        該公司產品分類：
                                                                        日置HIOKI傳感器
                                                WBGT-213A黑球指數計
                                                COCORESEARCH傳感器
                                                T&D溫度記錄儀
                                                T-101-20張力計
                                                VT-06粘度計
                                                WBGT-213a 黑球指數計
                                                DA-130N密度計
                                                U-508H皮帶張力計
                                                FMX-004靜電測試儀
                                                ST-4 電阻測試儀
                                                60-C4恒溫水浴
                                                DR-A1折光儀
                                                VOAC7522H萬用表
                                                WP632AM檢測儀
                                                必佳PEAK放大鏡
                                                日本（KANETEC強力）
                                                日本小野（ONO SOKKI）
                                                日本（A&D)
                                                日本（SWAN）
                                            
    
                                    
    
                                
    
                    
    RTD500CNRTD500CN、日本東日扭力起子
    
                    
    
                        
     
    詳細說明
                
                            
    型號
                    		                        
    測量范圍
                    		                        
    全長
                    		                        
    重量
                    		                        
    參考（公制）
                    		        
            
                            
    最小~最大
                    		                        
    刻度
                    		                        
    舊型號
                    		                        
    扭力調整范圍
                    		        
            
                            
    cN.m
                    		                        
    cN.m
                    		                        
    mm
                    		                        
    kg
                    		                        
    最小~最大
                    		        
            
                            
     
                    		                        
     
                    		                        
     
                    		                        
     
                    		                        
     
                    		                        
     
                    		                        
    kgf.cm
                    		        
            
                            
    RTD15CN
                    		                        
    2~15
                    		                        
    0.1
                    		                        
    100
                    		                        
    50
                    		                        
    1.5RTD
                    		                        
    0.2~1.5
                    		        
            
                            
    RTD30CN
                    		                        
    4~30
                    		                        
    0.2
                    		                        
    100
                    		                        
    50
                    		                        
    3RTD
                    		                        
    0.4~3
                    		        
            
                            
    RTD60CN
                    		                        
    10~60
                    		                        
    0.5
                    		                        
    105
                    		                        
    80
                    		                        
    6RTD
                    		                        
    1~6
                    		        
            
                            
    RTD120CN
                    		                        
    20~120
                    		                        
    1
                    		                        
    120
                    		                        
    125
                    		                        
    12RTD
                    		                        
    2~12
                    		        
            
                            
    RTD260CN
                    		                        
    60~260
                    		                        
    2
                    		                        
    140
                    		                        
    225
                    		                        
    26RTD
                    		                        
    6~26
                    		        
            
                            
    RTD500CN
                    		                        
    100~500
                    		                        
    2.5
                    		                        
    150
                    		                        
    330
                    		                        
    50RTD
                    		                        
    10~50
                    		        
        
    注1:RTD500CN用輔助緊固工具另購
    注2:只有RTD15CN-260CN有鎖止機構
    
                    
    
                                        
    
                        該公司產品分類：
                                                                        扭力螺絲刀
                                                扭力扳手
                                                艾固扭力測試儀
                                                日本強力磁性表座
                                                艾森精密針規
                                                日本佐藤溫濕度記錄儀
                                                日本孔雀厚薄表
                                                日本橫河張力計
                                                日本強力高斯計
                                                日本得樂測厚規/深度表/硬度計
                                                UNITTA音波式皮帶張力計
                                                TETKO絲網張力計
                                                日本中村扭力工具
                                                日本東日扭力工具
                                            
    
                                    
    
                                
    
                    
    LTD15CN日本東日扭力起子
    
                    
    
                        
                
                            LTD            Torque Screwdriver                                    
    Direction
                    		                     
            
                                                              
            
                                         
                
    Non-Rotary Adjustable Style
                
    Clicks at Set Torque Value
                
    Torque Value Easily Set with External Scale
                
                    		                     
            
                                         
                                        
                                                                                                   
                        
                            LTD Torque Screwdriver                                                                         
                                		                    
                        
                                                     TDT Digital Torque Screwdriver Tester                        TDT                        Digital Torque Driver Tester                    
                        
                                                 
                        
                                                                                                                            
                                    
                    		                     
            
                             Select proper model according to unit of measure as following color code :                     
            
                                         
                
                                        
                            S.I. =                                                                          Metric =                                                                          American =                                             
                                    
                
                    		                        
    Accuracy ±3%
                    		                     
            
                                         
                                                        
                            Model                        Torque Range                        Overall Length                        Weight Approx.                    
                        
                            S.I.                        METRIC                        AMERICAN                        Min.-Max.                        Graduation                        in.                        mm                        oz.                        g                    
                        
                            S.I.                        METRIC                        AMERICAN                        S.I.                        METRIC                        AMERICAN                    
                        
                            -                        -                        LTD24Z                        -                        -                        in.oz  6-24                        -                        -                        in.oz  0.1                        3 15/16                        -                        1 7/8                        -                    
                        
                            LTD50Z                        15-50                        0.25                        3 15/16                        1 7/8                    
                        
                            LTD100Z                        20-100                        0.5                        4 5/16                        2 7/32                    
                        
                            LTD15CN                        1.5LTD                        1.5LTD-A                        cN.M                        2-15                        kgf.cm                        0.2-1.5                        in.lbs                        0.2-1.5                        cN.M                        0.1                        kgf.cm                        0.01                        in.lbs  0.005                        3 15/16                        100                         1 7/8                        50                    
                        
                            LTD30CN                        3LTD                        3LTD-A                        4-30                        0.4-3                        0.4-3                        0.2                        0.02                        0.01                    
                        
                            LTD60CN                        6LTD                        6LTD-A                        10-60                        1-6                        1-6                        0.5                        0.05                        0.025                        4 5/16                        105                        2 7/32                        80                    
                        
                            LTD120CN                        12LTD                        12LTD-A                        20-120                        2-12                        2-12                        1                        0.1                        0.05                        4 31/32                        120                        4 7/16                        125                     
                        
                            LTD260CN                        26LTD                        26LTD-A                        60-260                        6-26                        6-26                        2                        0.2                        0.1                        4 5/8                        140                        8 13/16                        215                    
                        
                            LTD500CN                        50LTD                        50LTD-A                        100-500                        10-50                        10-40                        2.5                        0.25                        0.25                        6 1/8                        150                        11 5/16                        320                    
                        
                            LTD1000CN                        100LTD                        100LTD-A                        200-1000                        20-100                        20-90                        5                        0.5                        0.5                        7 7/32                        180                        22 1/4                        580                    
                        
                            LTD2000CN                        200LTD                        200LTD-A                        300-2000                        30-200                        30-180                        10 1/16                        255                        40 9/16                        1150                    
                                    
                    		                     
            
                             Notes                     
            
                             1. For LTD260cn ~ 2000CN, present hook spanner is supplied as standard accessory.            2. For LTD120CN, 260CN, resin grip is supplied as standard accessory.             3. For LTD2000CN, auxiliary tightening tool is supplied as standard accessory.            4. For LTD500CN, 1000CN, optional auxiliary tightening tool is available.             5. Bits for LTD2000CN are supplied from only Tohnichi.            6. Standard bit, 6.35 HEX is available, except for LTD2000CN.        
        
    
                    
    
                                    
    
                                
    
                    
    RTD120CN日本東日扭力起子
    
                    
    
                        
                
                            RTD                                    
                    		                     
            
                                                              
            
                                         
    Used for any tightening operation such as mass production,maintenance.            The rotary slip clutch reduces the possibility of over-torque. Once torque set is achieved, even if more force is applied, the tool ratchetsdoes not add additional torque.
                    		                     
            
                                         
                
                                        
                            RTD                                                                         
                                                                
                                        Complimentary Products                                
                                    
                                        TDT                                    TDT                                    Digital Torque Driver Tester                                
                                                            
                                		                    
                                    
                
                    		                     
            
                             Select proper model according to unit of measure as following color code :                     
            
                                         
                                        
                            S.I. =                                                                          Metric =                                                                          American =                                             
                                    
                    		                        
    Accuracy ±3%
                    		                     
            
                                         
                                                        
                            MODEL                        TORQUE RANGE                        Overall Length                        Weight Approx.                        Accessories                    
                        
                            S.I.                        METRIC                        AMERICAN                        min.-max.                        Graduation                        mm                        in.                        g                        oz.                        Handle Bar                        Hook Spanner                    
                        
                            S.I.                        METRIC                        AMERICAN                        S.I.                        METRIC                        AMERICAN                    
                        
                            -                        -                        RTD24Z                        -                        -                        in·oz                        6-24                        -                        -                        in·oz                        0.1                        -                        3 15/16                        -                        1 7/8                        -                        -                    
                        
                            RTD50Z                        15-50                        0.25                        3 15/16                        1 7/8                    
                        
                            RTD100Z                        20-100                        0.5                        4 5/16                        2 7/32                    
                        
                            RTD15CN                        1.5RTD                        1.5RTD-A                        cN·m                        2-15                        kgf·cm                        0.2-1.5                        in·lbs                        0.2-1.5                        cN·m                        0.1                        kgf·cm                        0.01                        in·lbs                        0.005                        100                        3 15/16                        50                         1 7/8                    
                        
                            RTD30CN                        3RTD                        3RTD-A                        4-30                        0.4-3                        0.4-3                        0.2                        0.02                        0.01                        100                        3 15/16                        50                        1 7/8                    
                        
                            RTD60CN                        6RTD                        6RTD-A                        10-60                        1-6                        1-6                        0.5                        0.05                        0.025                        105                        4 5/16                        80                        2 7/32                    
                        
                            RTD120CN                        12RTD                        12RTD-A                        20-120                        2-12                        2-12                        1                        0.1                        0.05                        120                        4 31/32                        125                        4 7/16                    
                        
                            RTD260CN                        26RTD                        26RTD-A                        60-260                        6-26                        6-26                        2                        0.2                        0.1                        140                        4 5/8                        225                        8 13/16                        Standard                    
                        
                            RTD500CN                        50RTD                        50RTD-A                        100-500                        10-50                        10-40                        2.5                        0.25                        0.25                        150                        6 1/8                        330                        11 5/16                        Option                    
                                    
                    		                     
            
                             Note                     
            
                             1.For models RTD260CN, 500CN, a hook spanner is supplied as a standard accessory for setting torque.            2.For models RTD120CN, 260CN, a resin grip is standard.            3. This series accepts standard 6.35 (1/4) hex bits, sold separately. Refer to bits page.        
        
    
                    
    
                                    
    
                                
    
                    
    RTD30CN日本東日扭力起子
    
                    
    
                        
                
                            RTD                                    
                    		                     
            
                                                              
            
                                         
    Used for any tightening operation such as mass production,maintenance.            The rotary slip clutch reduces the possibility of over-torque. Once torque set is achieved, even if more force is applied, the tool ratchetsdoes not add additional torque.
                    		                     
            
                                         
                
                                        
                            RTD                                                                         
                                                                
                                        Complimentary Products                                
                                    
                                        TDT                                    TDT                                    Digital Torque Driver Tester                                
                                                            
                                		                    
                                    
                
                    		                     
            
                             Select proper model according to unit of measure as following color code :                     
            
                                         
                                        
                            S.I. =                                                                          Metric =                                                                          American =                                             
                                    
                    		                        
    Accuracy ±3%
                    		                     
            
                                         
                                                        
                            MODEL                        TORQUE RANGE                        Overall Length                        Weight Approx.                        Accessories                    
                        
                            S.I.                        METRIC                        AMERICAN                        min.-max.                        Graduation                        mm                        in.                        g                        oz.                        Handle Bar                        Hook Spanner                    
                        
                            S.I.                        METRIC                        AMERICAN                        S.I.                        METRIC                        AMERICAN                    
                        
                            -                        -                        RTD24Z                        -                        -                        in·oz                        6-24                        -                        -                        in·oz                        0.1                        -                        3 15/16                        -                        1 7/8                        -                        -                    
                        
                            RTD50Z                        15-50                        0.25                        3 15/16                        1 7/8                    
                        
                            RTD100Z                        20-100                        0.5                        4 5/16                        2 7/32                    
                        
                            RTD15CN                        1.5RTD                        1.5RTD-A                        cN·m                        2-15                        kgf·cm                        0.2-1.5                        in·lbs                        0.2-1.5                        cN·m                        0.1                        kgf·cm                        0.01                        in·lbs                        0.005                        100                        3 15/16                        50                         1 7/8                    
                        
                            RTD30CN                        3RTD                        3RTD-A                        4-30                        0.4-3                        0.4-3                        0.2                        0.02                        0.01                        100                        3 15/16                        50                        1 7/8                    
                        
                            RTD60CN                        6RTD                        6RTD-A                        10-60                        1-6                        1-6                        0.5                        0.05                        0.025                        105                        4 5/16                        80                        2 7/32                    
                        
                            RTD120CN                        12RTD                        12RTD-A                        20-120                        2-12                        2-12                        1                        0.1                        0.05                        120                        4 31/32                        125                        4 7/16                    
                        
                            RTD260CN                        26RTD                        26RTD-A                        60-260                        6-26                        6-26                        2                        0.2                        0.1                        140                        4 5/8                        225                        8 13/16                        Standard                    
                        
                            RTD500CN                        50RTD                        50RTD-A                        100-500                        10-50                        10-40                        2.5                        0.25                        0.25                        150                        6 1/8                        330                        11 5/16                        Option                    
                                    
                    		                     
            
                             Note                     
            
                             1.For models RTD260CN, 500CN, a hook spanner is supplied as a standard accessory for setting torque.            2.For models RTD120CN, 260CN, a resin grip is standard.            3. This series accepts standard 6.35 (1/4) hex bits, sold separately. Refer to bits page.        
        
    
                    
    
                                    
    
                                
    
                    
    RTD15CN日本東日扭力起子
    
                    
    
                        
                
                            RTD                                    
                    		                     
            
                                                              
            
                                         
    Used for any tightening operation such as mass production,maintenance.            The rotary slip clutch reduces the possibility of over-torque. Once torque set is achieved, even if more force is applied, the tool ratchetsdoes not add additional torque.
                    		                     
            
                                         
                
                                        
                            RTD                                                                         
                                                                
                                        Complimentary Products                                
                                    
                                        TDT                                    TDT                                    Digital Torque Driver Tester                                
                                                            
                                		                    
                                    
                
                    		                     
            
                             Select proper model according to unit of measure as following color code :                     
            
                                         
                                        
                            S.I. =                                                                          Metric =                                                                          American =                                             
                                    
                    		                        
    Accuracy ±3%
                    		                     
            
                                         
                                                        
                            MODEL                        TORQUE RANGE                        Overall Length                        Weight Approx.                        Accessories                    
                        
                            S.I.                        METRIC                        AMERICAN                        min.-max.                        Graduation                        mm                        in.                        g                        oz.                        Handle Bar                        Hook Spanner                    
                        
                            S.I.                        METRIC                        AMERICAN                        S.I.                        METRIC                        AMERICAN                    
                        
                            -                        -                        RTD24Z                        -                        -                        in·oz                        6-24                        -                        -                        in·oz                        0.1                        -                        3 15/16                        -                        1 7/8                        -                        -                    
                        
                            RTD50Z                        15-50                        0.25                        3 15/16                        1 7/8                    
                        
                            RTD100Z                        20-100                        0.5                        4 5/16                        2 7/32                    
                        
                            RTD15CN                        1.5RTD                        1.5RTD-A                        cN·m                        2-15                        kgf·cm                        0.2-1.5                        in·lbs                        0.2-1.5                        cN·m                        0.1                        kgf·cm                        0.01                        in·lbs                        0.005                        100                        3 15/16                        50                         1 7/8                    
                        
                            RTD30CN                        3RTD                        3RTD-A                        4-30                        0.4-3                        0.4-3                        0.2                        0.02                        0.01                        100                        3 15/16                        50                        1 7/8                    
                        
                            RTD60CN                        6RTD                        6RTD-A                        10-60                        1-6                        1-6                        0.5                        0.05                        0.025                        105                        4 5/16                        80                        2 7/32                    
                        
                            RTD120CN                        12RTD                        12RTD-A                        20-120                        2-12                        2-12                        1                        0.1                        0.05                        120                        4 31/32                        125                        4 7/16                    
                        
                            RTD260CN                        26RTD                        26RTD-A                        60-260                        6-26                        6-26                        2                        0.2                        0.1                        140                        4 5/8                        225                        8 13/16                        Standard                    
                        
                            RTD500CN                        50RTD                        50RTD-A                        100-500                        10-50                        10-40                        2.5                        0.25                        0.25                        150                        6 1/8                        330                        11 5/16                        Option                    
                                    
                    		                     
            
                             Note                     
            
                             1.For models RTD260CN, 500CN, a hook spanner is supplied as a standard accessory for setting torque.            2.For models RTD120CN, 260CN, a resin grip is standard.            3. This series accepts standard 6.35 (1/4) hex bits, sold separately. Refer to bits page.        
        
    
                    
    
                                    
    
                                
    
                    
    LTD500CN日本東日扭力起子
    
                    
    
                        
                
                            LTD            Torque Screwdriver                                    
    Direction
                    		                     
            
                                                              
            
                                         
                
    Non-Rotary Adjustable Style
                
    Clicks at Set Torque Value
                
    Torque Value Easily Set with External Scale
                
                    		                     
            
                                         
                                        
                                                                                                   
                        
                            LTD Torque Screwdriver                                                                         
                                		                    
                        
                                                     TDT Digital Torque Screwdriver Tester                        TDT                        Digital Torque Driver Tester                    
                        
                                                 
                        
                                                                                                                            
                                    
                    		                     
            
                             Select proper model according to unit of measure as following color code :                     
            
                                         
                
                                        
                            S.I. =                                                                          Metric =                                                                          American =                                             
                                    
                
                    		                        
    Accuracy ±3%
                    		                     
            
                                         
                                                        
                            Model                        Torque Range                        Overall Length                        Weight Approx.                    
                        
                            S.I.                        METRIC                        AMERICAN                        Min.-Max.                        Graduation                        in.                        mm                        oz.                        g                    
                        
                            S.I.                        METRIC                        AMERICAN                        S.I.                        METRIC                        AMERICAN                    
                        
                            -                        -                        LTD24Z                        -                        -                        in.oz  6-24                        -                        -                        in.oz  0.1                        3 15/16                        -                        1 7/8                        -                    
                        
                            LTD50Z                        15-50                        0.25                        3 15/16                        1 7/8                    
                        
                            LTD100Z                        20-100                        0.5                        4 5/16                        2 7/32                    
                        
                            LTD15CN                        1.5LTD                        1.5LTD-A                        cN.M                        2-15                        kgf.cm                        0.2-1.5                        in.lbs                        0.2-1.5                        cN.M                        0.1                        kgf.cm                        0.01                        in.lbs  0.005                        3 15/16                        100                         1 7/8                        50                    
                        
                            LTD30CN                        3LTD                        3LTD-A                        4-30                        0.4-3                        0.4-3                        0.2                        0.02                        0.01                    
                        
                            LTD60CN                        6LTD                        6LTD-A                        10-60                        1-6                        1-6                        0.5                        0.05                        0.025                        4 5/16                        105                        2 7/32                        80                    
                        
                            LTD120CN                        12LTD                        12LTD-A                        20-120                        2-12                        2-12                        1                        0.1                        0.05                        4 31/32                        120                        4 7/16                        125                     
                        
                            LTD260CN                        26LTD                        26LTD-A                        60-260                        6-26                        6-26                        2                        0.2                        0.1                        4 5/8                        140                        8 13/16                        215                    
                        
                            LTD500CN                        50LTD                        50LTD-A                        100-500                        10-50                        10-40                        2.5                        0.25                        0.25                        6 1/8                        150                        11 5/16                        320                    
                        
                            LTD1000CN                        100LTD                        100LTD-A                        200-1000                        20-100                        20-90                        5                        0.5                        0.5                        7 7/32                        180                        22 1/4                        580                    
                        
                            LTD2000CN                        200LTD                        200LTD-A                        300-2000                        30-200                        30-180                        10 1/16                        255                        40 9/16                        1150                    
                                    
                    		                     
            
                             Notes                     
            
                             1. For LTD260cn ~ 2000CN, present hook spanner is supplied as standard accessory.            2. For LTD120CN, 260CN, resin grip is supplied as standard accessory.             3. For LTD2000CN, auxiliary tightening tool is supplied as standard accessory.            4. For LTD500CN, 1000CN, optional auxiliary tightening tool is available.             5. Bits for LTD2000CN are supplied from only Tohnichi.            6. Standard bit, 6.35 HEX is available, except for LTD2000CN.        
        
    
                    
    
                                    
    
                                
    
                    
    LTD260CN日本東日扭力起子
    
                    
    
                        
                
                            LTD            Torque Screwdriver                                    
    Direction
                    		                     
            
                                                              
            
                                         
                
    Non-Rotary Adjustable Style
                
    Clicks at Set Torque Value
                
    Torque Value Easily Set with External Scale
                
                    		                     
            
                                         
                                        
                                                                                                   
                        
                            LTD Torque Screwdriver                                                                         
                                		                    
                        
                                                     TDT Digital Torque Screwdriver Tester                        TDT                        Digital Torque Driver Tester                    
                        
                                                 
                        
                                                                                                                            
                                    
                    		                     
            
                             Select proper model according to unit of measure as following color code :                     
            
                                         
                
                                        
                            S.I. =                                                                          Metric =                                                                          American =                                             
                                    
                
                    		                        
    Accuracy ±3%
                    		                     
            
                                         
                                                        
                            Model                        Torque Range                        Overall Length                        Weight Approx.                    
                        
                            S.I.                        METRIC                        AMERICAN                        Min.-Max.                        Graduation                        in.                        mm                        oz.                        g                    
                        
                            S.I.                        METRIC                        AMERICAN                        S.I.                        METRIC                        AMERICAN                    
                        
                            -                        -                        LTD24Z                        -                        -                        in.oz  6-24                        -                        -                        in.oz  0.1                        3 15/16                        -                        1 7/8                        -                    
                        
                            LTD50Z                        15-50                        0.25                        3 15/16                        1 7/8                    
                        
                            LTD100Z                        20-100                        0.5                        4 5/16                        2 7/32                    
                        
                            LTD15CN                        1.5LTD                        1.5LTD-A                        cN.M                        2-15                        kgf.cm                        0.2-1.5                        in.lbs                        0.2-1.5                        cN.M                        0.1                        kgf.cm                        0.01                        in.lbs  0.005                        3 15/16                        100                         1 7/8                        50                    
                        
                            LTD30CN                        3LTD                        3LTD-A                        4-30                        0.4-3                        0.4-3                        0.2                        0.02                        0.01                    
                        
                            LTD60CN                        6LTD                        6LTD-A                        10-60                        1-6                        1-6                        0.5                        0.05                        0.025                        4 5/16                        105                        2 7/32                        80                    
                        
                            LTD120CN                        12LTD                        12LTD-A                        20-120                        2-12                        2-12                        1                        0.1                        0.05                        4 31/32                        120                        4 7/16                        125                     
                        
                            LTD260CN                        26LTD                        26LTD-A                        60-260                        6-26                        6-26                        2                        0.2                        0.1                        4 5/8                        140                        8 13/16                        215                    
                        
                            LTD500CN                        50LTD                        50LTD-A                        100-500                        10-50                        10-40                        2.5                        0.25                        0.25                        6 1/8                        150                        11 5/16                        320                    
                        
                            LTD1000CN                        100LTD                        100LTD-A                        200-1000                        20-100                        20-90                        5                        0.5                        0.5                        7 7/32                        180                        22 1/4                        580                    
                        
                            LTD2000CN                        200LTD                        200LTD-A                        300-2000                        30-200                        30-180                        10 1/16                        255                        40 9/16                        1150                    
                                    
                    		                     
            
                             Notes                     
            
                             1. For LTD260cn ~ 2000CN, present hook spanner is supplied as standard accessory.            2. For LTD120CN, 260CN, resin grip is supplied as standard accessory.             3. For LTD2000CN, auxiliary tightening tool is supplied as standard accessory.            4. For LTD500CN, 1000CN, optional auxiliary tightening tool is available.             5. Bits for LTD2000CN are supplied from only Tohnichi.            6. Standard bit, 6.35 HEX is available, except for LTD2000CN.        
        
    
                    
    
                                    
    
                                
    
                    
    LTD120CN日本東日扭力起子
    
                    
    
                        
                
                            LTD            Torque Screwdriver                                    
    Direction
                    		                     
            
                                                              
            
                                         
                
    Non-Rotary Adjustable Style
                
    Clicks at Set Torque Value
                
    Torque Value Easily Set with External Scale
                
                    		                     
            
                                         
                                        
                                                                                                   
                        
                            LTD Torque Screwdriver                                                                         
                                		                    
                        
                                                     TDT Digital Torque Screwdriver Tester                        TDT                        Digital Torque Driver Tester                    
                        
                                                 
                        
                                                                                                                            
                                    
                    		                     
            
                             Select proper model according to unit of measure as following color code :                     
            
                                         
                
                                        
                            S.I. =                                                                          Metric =                                                                          American =                                             
                                    
                
                    		                        
    Accuracy ±3%
                    		                     
            
                                         
                                                        
                            Model                        Torque Range                        Overall Length                        Weight Approx.                    
                        
                            S.I.                        METRIC                        AMERICAN                        Min.-Max.                        Graduation                        in.                        mm                        oz.                        g                    
                        
                            S.I.                        METRIC                        AMERICAN                        S.I.                        METRIC                        AMERICAN                    
                        
                            -                        -                        LTD24Z                        -                        -                        in.oz  6-24                        -                        -                        in.oz  0.1                        3 15/16                        -                        1 7/8                        -                    
                        
                            LTD50Z                        15-50                        0.25                        3 15/16                        1 7/8                    
                        
                            LTD100Z                        20-100                        0.5                        4 5/16                        2 7/32                    
                        
                            LTD15CN                        1.5LTD                        1.5LTD-A                        cN.M                        2-15                        kgf.cm                        0.2-1.5                        in.lbs                        0.2-1.5                        cN.M                        0.1                        kgf.cm                        0.01                        in.lbs  0.005                        3 15/16                        100                         1 7/8                        50                    
                        
                            LTD30CN                        3LTD                        3LTD-A                        4-30                        0.4-3                        0.4-3                        0.2                        0.02                        0.01                    
                        
                            LTD60CN                        6LTD                        6LTD-A                        10-60                        1-6                        1-6                        0.5                        0.05                        0.025                        4 5/16                        105                        2 7/32                        80                    
                        
                            LTD120CN                        12LTD                        12LTD-A                        20-120                        2-12                        2-12                        1                        0.1                        0.05                        4 31/32                        120                        4 7/16                        125                     
                        
                            LTD260CN                        26LTD                        26LTD-A                        60-260                        6-26                        6-26                        2                        0.2                        0.1                        4 5/8                        140                        8 13/16                        215                    
                        
                            LTD500CN                        50LTD                        50LTD-A                        100-500                        10-50                        10-40                        2.5                        0.25                        0.25                        6 1/8                        150                        11 5/16                        320                    
                        
                            LTD1000CN                        100LTD                        100LTD-A                        200-1000                        20-100                        20-90                        5                        0.5                        0.5                        7 7/32                        180                        22 1/4                        580                    
                        
                            LTD2000CN                        200LTD                        200LTD-A                        300-2000                        30-200                        30-180                        10 1/16                        255                        40 9/16                        1150                    
                                    
                    		                     
            
                             Notes                     
            
                             1. For LTD260cn ~ 2000CN, present hook spanner is supplied as standard accessory.            2. For LTD120CN, 260CN, resin grip is supplied as standard accessory.             3. For LTD2000CN, auxiliary tightening tool is supplied as standard accessory.            4. For LTD500CN, 1000CN, optional auxiliary tightening tool is available.             5. Bits for LTD2000CN are supplied from only Tohnichi.            6. Standard bit, 6.35 HEX is available, except for LTD2000CN.        
        
    
                    
    
                                    
    
                                
    
                    
    LTD60CN日本東日扭力起子
    
                    
    
                        
                
                            LTD            Torque Screwdriver                                    
    Direction
                    		                     
            
                                                              
            
                                         
                
    Non-Rotary Adjustable Style
                
    Clicks at Set Torque Value
                
    Torque Value Easily Set with External Scale
                
                    		                     
            
                                         
                                        
                                                                                                   
                        
                            LTD Torque Screwdriver                                                                         
                                		                    
                        
                                                     TDT Digital Torque Screwdriver Tester                        TDT                        Digital Torque Driver Tester                    
                        
                                                 
                        
                                                                                                                            
                                    
                    		                     
            
                             Select proper model according to unit of measure as following color code :                     
            
                                         
                
                                        
                            S.I. =                                                                          Metric =                                                                          American =                                             
                                    
                
                    		                        
    Accuracy ±3%
                    		                     
            
                                         
                                                        
                            Model                        Torque Range                        Overall Length                        Weight Approx.                    
                        
                            S.I.                        METRIC                        AMERICAN                        Min.-Max.                        Graduation                        in.                        mm                        oz.                        g                    
                        
                            S.I.                        METRIC                        AMERICAN                        S.I.                        METRIC                        AMERICAN                    
                        
                            -                        -                        LTD24Z                        -                        -                        in.oz  6-24                        -                        -                        in.oz  0.1                        3 15/16                        -                        1 7/8                        -                    
                        
                            LTD50Z                        15-50                        0.25                        3 15/16                        1 7/8                    
                        
                            LTD100Z                        20-100                        0.5                        4 5/16                        2 7/32                    
                        
                            LTD15CN                        1.5LTD                        1.5LTD-A                        cN.M                        2-15                        kgf.cm                        0.2-1.5                        in.lbs                        0.2-1.5                        cN.M                        0.1                        kgf.cm                        0.01                        in.lbs  0.005                        3 15/16                        100                         1 7/8                        50                    
                        
                            LTD30CN                        3LTD                        3LTD-A                        4-30                        0.4-3                        0.4-3                        0.2                        0.02                        0.01                    
                        
                            LTD60CN                        6LTD                        6LTD-A                        10-60                        1-6                        1-6                        0.5                        0.05                        0.025                        4 5/16                        105                        2 7/32                        80                    
                        
                            LTD120CN                        12LTD                        12LTD-A                        20-120                        2-12                        2-12                        1                        0.1                        0.05                        4 31/32                        120                        4 7/16                        125                     
                        
                            LTD260CN                        26LTD                        26LTD-A                        60-260                        6-26                        6-26                        2                        0.2                        0.1                        4 5/8                        140                        8 13/16                        215                    
                        
                            LTD500CN                        50LTD                        50LTD-A                        100-500                        10-50                        10-40                        2.5                        0.25                        0.25                        6 1/8                        150                        11 5/16                        320                    
                        
                            LTD1000CN                        100LTD                        100LTD-A                        200-1000                        20-100                        20-90                        5                        0.5                        0.5                        7 7/32                        180                        22 1/4                        580                    
                        
                            LTD2000CN                        200LTD                        200LTD-A                        300-2000                        30-200                        30-180                        10 1/16                        255                        40 9/16                        1150                    
                                    
                    		                     
            
                             Notes                     
            
                             1. For LTD260cn ~ 2000CN, present hook spanner is supplied as standard accessory.            2. For LTD120CN, 260CN, resin grip is supplied as standard accessory.             3. For LTD2000CN, auxiliary tightening tool is supplied as standard accessory.            4. For LTD500CN, 1000CN, optional auxiliary tightening tool is available.             5. Bits for LTD2000CN are supplied from only Tohnichi.            6. Standard bit, 6.35 HEX is available, except for LTD2000CN.        
        
    
                    
    
                                    
    
                            
    
            
        
    
        
    
            
            
    
                
    
                    
    最新產品
    
                
    
                
            
    
        
    
    
    
    
    
    熱門儀器：
    液相色譜儀
    氣相色譜儀
    原子熒光光譜儀
    可見分光光度計
    液質聯用儀
    壓力試驗機
    酸度計（PH計）
    離心機
    高速離心機
    冷凍離心機
    生物顯微鏡
    金相顯微鏡
    標準物質
    生物試劑

    


    

    
    

    

亚洲AV无码专区在线播放,无码人妻中文字幕在线,国产2020最新精品视频,丰满人妻精品一区二区


    <button id="y0k2s"></button>
  • <del id="y0k2s"></del>
  • <cite id="y0k2s"></cite>
    <bdo id="y0k2s"><strong id="y0k2s"></strong></bdo>
    
<cite id="y0k2s"><center id="y0k2s"></center></cite>
    <center id="y0k2s"><acronym id="y0k2s"></acronym></center>
    

    • <button id="y0k2s"><source id="y0k2s"></source></button>